Tips For Using 3M Double Side Tape

3M Double Side Tape is used in a wide range of industries, especially in the automotive industry. The reason is not only the ability to stick, but also easy to peel off. And 3M tape will not leave too much trace after removal, which is an important factor for the widespread use of 3M double-sided tape in the automotive industry. So how can 3M double-sided tape achieve the best paste effect on the car? As a Foam Tape Manufacturer, we offer you 4 small steps to achieve the best paste on your car with 3M tape.

First, the surface area that the car needs to be pasted is cleaned and kept dry.

2. After waiting for the surface of the car to dry, apply 3M tape to the surface and apply pressure to the roller to make it fit effectively.

Third, the 3M tape release paper is torn off, and then the bonding material will be attached, and the same pressure is applied to make it fit effectively.

4. When 3M Double Side Tape is pasted, it should be pasted with the opposite end and then slowly pressed to the other end to reduce the chance of foaming. To remove air bubbles, increase the pressure to the limit of the item's tolerance. The ideal temperature for pasting is 15-38 ° C, not lower than 10 ° C.

The above is the use of 3M Double Side Tape in the automotive industry.