How to Choose 3M Double Side Tape?

3M Double Side Tape is widely used in computers, mobile phones, communications, home appliances, audio-visual equipment, automobiles, and other products. It should be selected according to the application product and environment needs. Please refer to the following instructions:

1. Non-woven substrate double-sided adhesive and good processability, generally long-term temperature resistance 70-80 ° C, short-term temperature resistance 100-120 ° C, thickness is generally 0.08-0.15MM, suitable for nameplate, plastic paste He, automobile, mobile phone, electrical appliance, sponge, rubber, signage, paper products, toys and other industries, assembly of home appliances and electronic instruments, display lenses.

2. The non-substrate double-sided adhesive has excellent adhesion effect, can prevent falling off and excellent waterproof performance, good processability, good temperature resistance, short-term temperature resistance 204-230 ° C, general long-term temperature resistance 120-145 ° C, The thickness is generally 0.05-0.13MM, which is suitable for the bonding of nameplates, panels, and decorative parts.

3M Double Side Tape

3. PET substrate double-sided adhesive has good temperature resistance and strong shear resistance, generally, long-term temperature resistance of 100-125 ° C, short-term temperature resistance of 150-200 ° C, the thickness is generally 0.048-0.2MM, suitable for the nameplate, LCD, the decoration of decorative items and decorative parts.

4. Double Sided Foam Tape has softness, good applicability, good initial tack, and good adhesion, good solvent resistance, and UV resistance, generally 0.4-1.0MM thickness, short-term temperature resistance 130-150°C, long-term temperature resistance 80- 93 ° C, suitable for the bonding of air conditioners, office furniture, communication products, can replace the screw fixing design to make the products more beautiful.

5. The hot melt adhesive film has good consistency, uniform bonding thickness, no solvent, easy processing, and good adhesion to many objects. The thickness is 0.1MM, the color is translucent/amber, and the hot-melt softening temperature is 116-123 °C. Applicable to the bonding of nameplates, plastics, and hardware; good results can also be obtained by bonding on the surface of uneven objects. Die Cutting 3M Tape Factory recommends initial bonding conditions of 132-138 ° C, bonding time 1-2 seconds, and pressure 10-20 psi.